Problem with GPIO

[GeorgeJirka]

Hi.

I use your library to control my GPIO on cubieboard2. And I try blink with led on PIN 32 (PD0). But LED don' t blinking.

I download your library: https://github.com/gootoomoon/WiringCB-python/archive/master.zip
And install: sudo python3 setup.py install # python 3.2.x

Any idea, wht is wrong?

`import wiringpi2
import time
OUTPUT = 1
pin = 32
HIGH = 1
LOW = 0

wiringpi2.wiringPiSetupPhys() # init pin to phy mode,U14(148) U15(4996)
wiringpi2.pinMode(pin,OUTPUT) # set pin 2 to output mode

while 1:
wiringpi2.digitalWrite(pin,HIGH) # Write HIGH to pin 2(U14 pin 2)
time.sleep(1)
wiringpi2.digitalWrite(pin,LOW) # Write LOW to pin
time.sleep(1)
`

[GeorgeJirka]

Ok. Problem was found.

Pin 32 - PD0 is pin = 1.