Invalid Pin 2

[bangonkali]

Why am i getting

linaro@cubieboard2:~/Documents/Projects/wiringPi$ sudo ./wiringTest
invalid pin,please check it over.

My code is the following (changed pin 1 to pin 2)

/**
 * softPwm test
 * author:gootoomoon
 * gcc -o test digital.c -lwiringPi -lpthread
 */
#include <stdio.h>
#include <errno.h>
#include <string.h>

#include <wiringPi.h>
#define OUTPUT  1
#define HIGH    1
#define LOW     0

int pin = 2;

int main()
{
        if(wiringPiSetupPhys() == -1)
        {
                fprintf(stdout, "wiring lib init error:%s", strerror(errno));
                return 1;
        }
        pinMode(pin,OUTPUT);

        for(;;){
                digitalWrite(pin,HIGH);
                delay(1000);
                digitalWrite(pin,LOW);
                delay(1000);
        }
}

Also, If I use pin 1 based on the diagram, my LED doesn't blink.

http://cubiebook.org/images/1/16/Gpio_defination_large.jpg

What could be the problem?

I was able to compile successfully. Here are some outputs:

linaro@cubieboard2:~/Documents/Projects/wiringPi$ gpio -v
gpio version: 2.00
Copyright (c) 2012-2013 Gordon Henderson
This is free software with ABSOLUTELY NO WARRANTY.
For details type: gpio -warranty

This Raspberry Pi is a revision 2 board.

However, I am using Cubieboard 2 with Lubuntu.

[bangonkali]

Ok. I think this is Crazy. I figured out that the pin1 from the image from the previous post I made (http://cubiebook.org/images/1/16/Gpio_defination_large.jpg) is actually pin50 in your implementation. Can you give the link for the full pin assignments of this great library you created? Thanks!